5.2.2 Speaker System + Home Theater Receiver Bundles
A 5.2.2 speaker home theater bundle INCLUDES front left and right main speakers which should be located at or near each side of your television or projection screen; two elevation/height speakers for Dolby Atmos/DTS:X vertical effects either built into the top of, or as separate modules sitting atop, each front speaker angled upwards reflecting sound off the ceiling; a center channel speaker primarily for dialogue clarity which should be centered below your TV or projection screen; left and right rear surround speakers for off-screen/background effects which should be located near each side of, or slightly behind, your prime seating area, preferably slightly above ear level; two powered subwoofers to provide the lowest frequency bass effects, which typically sound best located near corners of the room; and a 7.2-channel or more home theater receiver. Speaker wire, subwoofer cables, and HDMI cables are sold separately.
Are you looking to set up a Dolby Atmos/DTS:X capable system with dual subwoofers? Do you want to MAXIMIZE the level of surround sound immersion that can be squeezed from seven channels within the same room space required for a 5.2 system? Consider the recommended 5.2.2 speaker home theater audio systems below. Before completing your home theater system purchase, you should compare the BUNDLE price to the total system price if you were to instead add each component to your shopping cart INDIVIDUALLY to be sure you get the lower overall price, because prices fluctuate.
Klipsch Reference Series R-625FA 5.2.2 Speaker System
+ Denon AVR-S970H 7.2 or Integra DRX 3.4 9.2 Receiver
The 40″ high, 9.4″ wide, 17.3″ deep, 49 pound Klipsch Reference R-625FA floor standing tower speaker [Klipsch link] features a Tractrix horn loaded 1″ aluminum LTS tweeter, dual 6½” spun copper IMG woofers, and a Tractrix rear port. Embedded on the top is an integrated recessed elevation speaker with angled upward-firing 1″ tweeter and 5¼” woofer. Magnetically attached speaker grille. Frequency response is 38Hz-21kHz ±3dB. Sensitivity is 96dB. Power handling is 100 watts continuous and 400 watts peak. 8Ω impedance compatible.
The 18.8″ wide, 7.3″ high, 7.6″ deep, and 13.5 pound Klipsch R-52C center channel speaker [Klipsch link] features a 1″ tweeter and dual 5¼” woofers in a sealed cabinet. Magnetically attached grille. Frequency response is 89Hz-21kHz ±3dB. Sensitivity is 95dB. Power handling is 100 watts continuous and 400 watts peak. 8Ω compatible.
Klipsch R-625FA Atmos towers, R-52C center, R-41M surrounds,
2 R-12SW subs, Denon AVR-S970H 7.2 receiver bundle, Amazon
Or, buy individually: R-625FA x2, R-52C, R-41M, R-12SW x2,
AVR-S970H.
Amazon seller Adorama is an authorized Klipsch and Denon dealer!
Klipsch R-625FA Atmos towers, R-52C center, R-41M surrounds,
2 R-12SW subs, Integra DRX-3.4 9.2 receiver bundle, Amazon
Or, buy individually: R-625FA x2, R-52C, R-41M, R-12SW x2,
DRX 3.4 is NOT SOLD at Amazon.
Amazon seller Adorama is an authorized Klipsch dealer!
The 11.3″ high, 5.8″ wide, 7.9″ deep, and 7 pound Klipsch R-41M bookshelf speakers [Klipsch link] function as the left and right side/rear surround speakers. They feature a 1″ tweeter, 4″ woofer, and are rear ported. Magnetically attached grille. Frequency response is 68Hz-21kHz ±3dB. Sensitivity is 90dB. Power handling is 50 watts continuous and 200 watts peak. 8Ω compatible.
You get TWO of the 16.5″ high, 14″ wide, 19.2″ deep, 33 pound Klipsch Reference R-12SW subwoofer [Klipsch link] which features a 12″ copper-spun IMG front-firing woofer and rear port, powered by 200 watts continuous and 400 watts peak. Frequency response is 29Hz-120Hz ±3dB.
Supports Dirac Live room correction! The Integra DRX-3.4 9.2-channel home theater receiver [Integra link] is rated 100 watts per channel with two channels driven. Surround sound decoding includes Dolby Atmos/Height Virtualization and DTS:X as well as Dolby TrueHD, DTS-HD Master Audio, Dolby Surround, and DTS Neural:X upmixing. VRR (Variable Refresh Rate) and ALLM (Auto Low Latency Mode) for gaming. Connectivity includes 7 HDMI inputs (one front), eARC/ARC, Ethernet, optical and coaxial digital audio input, 7 analog RCA audio inputs (one front), phono input, USB input, component video, 3 composite video (one front), full set of pre-outs with Zone 2/Zone 3, front ¼” headphone jack, front ⅛” mic input for Dirac Live/AccuEQ Advance room calibration, RS-232 input, 2 IR inputs, 1 IR output, and 3 12 V trigger outs. Wi-Fi and Bluetooth. Remote control. Dimensions are 17.1″ wide, 6.9″ high, 14.8″ deep, and it weighs 29.8 pounds. see [Dirac Live Calibration Guide YouTube video]
You can purchase the Klipsch Reference R-625FA floor standing tower speakers with built-in upward-firing Dolby Atmos, an R-52C center channel speaker, a pair of R-41M bookshelf surrounds, two R-12SW subwoofers, and either a Denon AVR-S970H 7.2-channel or an Integra DRX-3.4 9.2-channel surround sound receiver by clicking the appropriate text links underneath the system images above. Packaged and delivered in seven boxes.
This page was last updated on July 9, 2025.