3.1.2 Speaker System + Home Theater Receiver Bundles
A 3.1.2 speaker home theater bundle INCLUDES front left and right main speakers which should be located at or near each side of your television or projection screen; two elevation/height speakers for Dolby Atmos/DTS:X vertical effects either built into the top of, or as separate modules sitting atop, each front speaker angled upwards reflecting sound off the ceiling, or a pair of in-ceiling speakers angled downwards; a center channel speaker primarily for dialogue clarity which should be centered below your TV or projection screen; a powered subwoofer to provide the lowest frequency bass effects, which typically sounds best located near a corner of the room; and a 5.1-channel or more home theater receiver that is capable of Dolby Atmos/DTS:X decoding. (Not all entry-level five-channel receivers are!) Speaker wire, subwoofer cable, and HDMI cables are sold separately. It DOES NOT INCLUDE rear surround effects speakers to complete a 5.1.2 home theater system.
Are you seeking the best home theater audio experience possible WITHOUT THE HASSLE of running long speaker wires from the front to the back of your room? Or do you simply already own a nice pair of rear surround effects speakers and want to set up a 5.1.2 system? Consider the recommended 3.1.2 speaker home theater audio system below. Before completing your home theater system purchase, you should compare the BUNDLE price to the total system price if you were to instead add each component to your shopping cart INDIVIDUALLY to be sure you get the lower overall price, because prices fluctuate.
Klipsch Reference Premiere RP-8000F II 3.1.2 System +
Onkyo TX-NR6100 7.2-Channel Home Theater Receiver
The top-of-the-line 43.1″ high, 10.8″ wide, 18.3″ deep, and 61.4 pound Klipsch Reference Premiere RP-8000F II floor standing speakers [Klipsch link] each feature a Tractrix horn loaded 1″ titanium LTS vented tweeter, dual 8″ Cerametallic cone woofers, and dual rear-firing Tractrix ports in an internally braced MDF cabinet with magnetically attached grilles. Frequency response is 35Hz-25kHz ±3dB, sensitivity is 98dB, and power handling is 150 watts continuous and 600 watts peak. 8Ω impedance compatible.
The versatile wedge-shaped switchable Klipsch RP-500SA II surround sound speakers [Klipsch link] add Dolby Atmos and DTS:X effects by either placing them atop each RP-8000F II tower speaker firing upwards toward the ceiling as elevation speakers, or hanging/mounting them high on the front wall as height speakers. RP-500SA II speakers feature a 1″ tweeter and 5¼” woofer, are 8.5″ high, 6.8″ wide, 12.6″ deep, and weigh 9.6 pounds. Frequency response and sensitivity are listed as “Conforms to Dolby Atmos Specifications”. 8Ω compatible.
2 Klipsch RP-8000F II tower speakers, RP-500SA II Atmos height
modules, RP-404C II center, RP-1400SW subwoofer ALL IN EBONY,
Onkyo TX-NR6100 7.2-channel home theater receiver bundle, Amazon
Or, buy individually: RP-8000F II x2 or pair, RP-500SA II, RP-404C II,
RP-1400SW, TX-NR6100.
Amazon seller ListenUp is an authorized Klipsch and Onkyo dealer!
The shallow-depth design 26.9″ wide, 5.7″ high, only 6.5″ deep, and 20.3 pound RP-404C II center channel speaker [Klipsch link] features a 1″ tweeter and quad 4″ woofers inside a sealed enclosure. Frequency response is 87Hz-25kHz ±3dB. Power handling is 125 watts continuous and 500 watts peak. 8Ω compatible.
The 21.3″ high, 20″ wide, 25.7″ deep, and 83.7 pound Klipsch Reference Premiere Series RP-1400SW high-excursion subwoofer [Klipsch link] features a 14″ front-firing ultra long throw Cerametallic woofer and front Aerofoil slot port, powered by 500 watts continuous and 1000 watts peak. Frequency response is 16Hz-141Hz ±3dB.
The THX Select Certified Onkyo TX-NR6100 7.2-channel home theater receiver [Onkyo link] is rated 100 watts per channel with two channels driven. Surround sound decoding includes Dolby TrueHD, Dolby Atmos, DTS-HD/Master Audio, DTS:X, THX listening modes, and more. VRR (Variable Refresh Rate), ALLM (Auto Low Latency Mode), and QFT (Quick Frame Transport) for gaming. Connectivity includes 6 HDMI inputs (1-3 are 8K), eARC/ARC, Ethernet, USB, optical and coaxial digital audio input, 4 analog RCA audio inputs, phono input, front ¼” headphone jack, and front ⅛” mic input for AccuEQ room calibration. Wi-Fi and Bluetooth. Remote control. Dimensions are 17.1″ wide, 6.8″ high (without Wi-Fi antennas up), 14.9″ deep, and it weighs 21.6 pounds.
You can buy your Klipsch RP-8000F II tower speakers, RP-500SA II elevation/height speakers, RP-404C II center channel speaker, RP-1400SW subwoofer, and an Onkyo TX-NR6100 receiver by clicking on the appropriate text links underneath the system image above. Packaged and delivered in six boxes.
This page was last updated on June 30, 2025.