5.1.4 Speaker System + Home Theater Receiver Bundles
A 5.1.4 speaker home theater bundle INCLUDES front left and right main speakers which should be located at or near each side of your television or projection screen; two elevation/height speakers for Dolby Atmos/DTS:X vertical effects either built into the top of, or as separate modules sitting on top of, each front speaker angled upwards reflecting sound off the ceiling; a center channel speaker primarily for dialogue clarity which should be centered below your TV or projection screen; left and right rear surround speakers for off-screen/background effects which should be located near each side of, or slightly behind, your prime seating area, preferably slightly above ear level; two more elevation/height speakers for Dolby Atmos/DTS:X built into the top of, or as separate modules sitting atop, each rear speaker angled upwards reflecting sound off the ceiling, or another pair of in-ceiling speakers angled downwards; a powered subwoofer to provide the lowest frequency bass effects, which typically sounds best located near a corner of the room; and a 9.1-channel or more home theater receiver. Speaker wire, subwoofer cable, and HDMI cables are sold separately.
Are you wanting to experience Dolby Atmos and DTS:X height effects from BOTH the front and back of your room without taking up any more room space than a conventional 5.1 system? And do so on a reasonable budget? Consider the recommended 5.1.4 speaker home theater audio system below. Before completing your home theater system purchase, you should compare the BUNDLE price to the total system price if you were to instead add each component to your shopping cart INDIVIDUALLY to be sure you get the lower overall price, because prices fluctuate.
Klipsch Reference Cinema 5.1.4 Dolby Atmos Package
+ Integra DRX 3.4 9.2-Channel Home Theater Receiver
The Klipsch Reference Cinema 5.1.4 Dolby Atmos speaker system [Klipsch link] includes four identical wall-mountable speakers for the two fronts and two rears measuring 13.5″ high, 6.5″ wide, 7.5″ deep, and weighing 8.2 pounds. On the front, they each feature a Tractrix horn loaded 1″ aluminum LTS (Linear Travel Suspension) tweeter, 5¼” spun copper IMG (Injection Molded Graphite) woofer, and dual front-firing ports. On top is an angled upward-firing 4″ polyfiber woofer which conforms to Dolby Atmos specifications. Frequency response is 90Hz-20kHz ±3dB. Sensitivity 92dB. 8Ω impedance compatible. (For convenience, you might want to run 4-conductor speaker wire like this from the back of the receiver to each of these four speakers.)
Klipsch Reference Cinema 5.1.4 speaker system w/ Dolby Atmos and
Integra DRX 3.4 9.2-channel home theater receiver bundle, Amazon
Or, buy individually: Reference Cinema 5.1.4, DRX 3.4 is NOT SOLD
at Amazon. Amazon seller Adorama is an authorized Klipsch dealer!
The 17.6″ wide, 5.2″ high, 6.1″ deep, 7.4 pound wall-mountable center channel speaker features the same 1″ tweeter as the satellites, but with smaller dual 4″ woofers, and is also dual front-ported. Frequency response is 80Hz-20kHz ±3dB. Sensitivity is 91dB. 8Ω compatible.
The 14.5″ high, 12.5″ wide, 16.4″ deep, 24 pound subwoofer features a 10″ high excursion front-firing spun-copper IMG woofer and rear-firing port powered by 150 watts continuous and 300 watts peak with a frequency response of 32Hz-120Hz ±3dB.
Supports Dirac Live room correction! The Integra DRX-3.4 9.2-channel home theater receiver [Integra link] is rated 100 watts per channel with two channels driven. Surround sound decoding includes Dolby Atmos/Height Virtualization and DTS:X as well as Dolby TrueHD, DTS-HD Master Audio, Dolby Surround, and DTS Neural:X upmixing. VRR (Variable Refresh Rate) and ALLM (Auto Low Latency Mode) for gaming. Connectivity includes 7 HDMI inputs (one front), eARC/ARC, Ethernet, optical and coaxial digital audio input, 7 analog RCA audio inputs (one front), phono input, USB input, component video, 3 composite video (one front), full set of pre-outs with Zone 2/Zone 3, front ¼” headphone jack, front ⅛” mic input for Dirac Live/AccuEQ Advance room calibration, RS-232 input, 2 IR inputs, 1 IR output, and 3 12 V trigger outs. Wi-Fi and Bluetooth. Remote control. Dimensions are 17.1″ wide, 6.9″ high, 14.8″ deep, and it weighs 29.8 pounds. see [Dirac Live Calibration Guide YouTube video]
You can buy your Klipsch Reference Cinema 5.1.4 speaker package and Integra DRX 3.4 9.2-channel home theater receiver by clicking the appropriate text links underneath the system image above. Packaged and delivered in two boxes.
This page was last updated on July 9, 2025.