7.1 Speaker System and Home Theater Receiver Bundles
A 7.1 home theater system INCLUDES a front left and a front right speaker which should be located at or near each side of your television or projection screen; a center channel speaker for dialogue which should be located underneath your TV, projection screen, or ultra short throw projector; a pair of side surround speakers for off-screen effects which should be located to each side of your seating; a pair of back surround speakers also for off-screen effects which should be located behind your seating; a powered subwoofer to provide low frequency bass effects which usually sounds best located near a corner of the room; and a 7.1-channel or more surround sound receiver. Speaker wire, subwoofer cable, and HDMI cables are sold separately.
To be sure that you are buying at the lowest possible price (due to price variations, fluctuations, and sales), compare the BUNDLE PRICE to the TOTAL IF YOU INSTEAD ADD EACH SYSTEM COMPONENT TO YOUR SHOPPING CART INDIVIDUALLY (INCLUDING SHIPPING) before completing your purchase either way!
Will you be setting up your home theater in a medium to large size room? Are you wanting to take full advantage of the lossless Dolby TrueHD and DTS-HD Master Audio surround sound formats found on Blu-ray Discs? Don’t really care about Dolby Atmos and DTS:X? Check out the 7.1 home theater audio bundles below which include seven Klipsch Reference Premiere speakers, a Klipsch SPL subwoofer, and an Onkyo home theater receiver.
Klipsch Reference Premiere Speakers + SPL Sub + Onkyo 7.2 Receiver
The 36.1″ high, 8.2″ wide, 14.8″ deep, 38.6 pound Klipsch RP-5000F II floor standing front speakers [product link] [in Ebony] or [Walnut at Amazon] feature a Tractrix horn loaded 1″ titanium LTS vented tweeter, dual 5¼” Cerametallic cone woofers, and dual rear-firing Tractrix ports. Frequency response is 40Hz-25kHz ±3dB. Sensitivity is 95dB. Power handling is 100 watts continuous, 400 watts peak. The shallow-depth design 26.9″ wide, 5.7″ high, and only 6.5″ deep RP-404C II center channel speaker [product link] [in Ebony or Walnut at Amazon] features a 1″ tweeter and quad 4″ woofers in a sealed enclosure. Two pairs of the 13.6″ high, 6.8″ wide, 10.7″ deep RP-500M II bookshelf speakers [product link] [in Ebony or Walnut at Amazon] which feature a 1″ tweeter, 5¼” woofer, and rear Tractrix port function as side and back surrounds. Speaker impedances are compatible with Onkyo receiver. Lastly, the 16.6″ high, 14″ wide, 17.8″ deep, 37 pound SPL-100 subwoofer [product link] [YouTube video] [at Amazon] features a 10″ front-firing woofer and flare port powered by 200 watts continuous and 450 watts peak for bass down to 27Hz.
The THX Select Certified Onkyo TX-NR6100 7.2-channel network home theater receiver [product link] [at Amazon] is rated 100 watts per channel with two channels driven. Of course it decodes both Dolby TrueHD and DTS-HD Master Audio, and it also has THX listening modes. VRR (Variable Refresh Rate), ALLM (Auto Low Latency Mode), and QFT (Quick Frame Transport) for gaming. Connectivity includes 6 HDMI inputs (1-3 are 8K), eARC, Ethernet, USB, 2 digital audio inputs, 4 analog RCA audio inputs, phono input, ¼” headphone jack, ⅛” mic input for AccuEQ setup. Wi-Fi and Bluetooth. Receiver dimensions are 17.1″ wide, 6.8″ high (without antennas up), 14.9″ deep, and it weighs 21.6 pounds. BUNDLE PRICE with this Onkyo receiver, Ebony subwoofer, and either Ebony or Walnut speakers at Amazon.com.
Best Klipsch Reference Premiere + Best SPL Sub + Onkyo 7.2 Receiver
Want to take the audio performance to an entirely new level? The top-of-the-line 43.1″ high, 10.8″ wide, 18.3″ deep, 61.4 pound Klipsch RP-8000F II floor standing tower speaker [product link] [in Ebony] or [Walnut at Amazon] features a Tractrix horn loaded 1″ titanium LTS vented tweeter, dual 8″ Cerametallic cone woofers, and dual rear-firing Tractrix ports in an internally braced MDF cabinet. Frequency response is 35Hz-25kHz ±3dB, sensitivity is 98dB, and power handling is 150 watts continuous, 600 watts peak. The much larger 32.1″ wide, 6.9″ high, 15.1″ deep, 36.3 pound RP-504C II center channel speaker [product link] [in Ebony or Walnut at Amazon] features a 1″ tweeter, four 5¼” woofers, and a rear-firing port.
Two pairs of the wide-dispersion, sealed-cabinet design wall-hangable/mountable 14.2″ high, 11.9″ wide, 7.6″ deep, 16.7″ pound RP-502S II surround sound speakers [product link] [in Ebony or Walnut at Amazon] feature dual 1″ tweeters and dual 5¼” woofers and function as side and back surround effects speakers. Speaker impedances are compatible with receiver. Lastly, the 21.5″ high, 19.5″ wide, 22.3″ deep, 75.4 pound SPL-150 subwoofer [product link] [at Amazon] features a 15″ front-firing woofer and flare port powered by 400 watts continuous and 800 watts peak to provide room-filling deep bass down to 18Hz. BUNDLE PRICE with Onkyo TX-NR6100 receiver, Ebony subwoofer, and either Ebony or Walnut speakers at Amazon.com.